LaserSeries Sump Kits
Our lowest priced pro caliber kits.
Keyed Sock Panels
The sock baffle and sock panels are keyed for easy alignment and assembly.
Left or Right Orientation
The keyed sock baffle design allows it to be build in a right or left hand configuration. Changing orientation is as simple as flipping the clear panel over and reinstalling the sock panels.
Side Entry Inlets
The sock panels form a side chamber for the water to enter the sump. It then flows up and over the sock plate and into the socks. This configuration allows the socks to be changed with the return pump running.
Adjustable Water Depth
The running depth o the sump can be easily adjusted with two nylon thumbscrews.
Secondary Filtration
Media stands in the bubble trap can support filter foam or other filtration substrates for a final polish before the water enters the return chamber.
Sock Silencers
Sock silencers install into the top of standard plastic ring filter socks. The hole pattern and size in the silencer minimizes splashing while covering the sock hole with a sound deadening layer o water. Our silencers have a raised knurled hallow center post that makes them easy to remove while providing an extra emergency drain hole.
Made in USA
All of our kits are made with pride upon order right here in our shop in Headland, Alabama USA.
Items You'll Need for this Build..
- A glass aquarium, choose a kit to match the brand/size of tank you have
- Aquarium safe silicone (1 - 2 10.1 oz tubes depending on kit size)
- A Caulk Gun
- Caulking extension tips
- Weld-On #3, #4 or #16 acrylic cement
- A Hypo-25 applicator if using Weld-on #3 or #4
- Painter's tape
- A black permanent marker
- A carpenter's square
- Isopropyl alcohol (92% works best)
- Two bar clamps the length of the inside depth of your tank or longer.
- A tape measure
- Rubber gloves
- Safety glasses
- A respirator
| Sump Kits | |||||||
| Features | Basic | Standard | Pro | Ultimate | Roller Mat | Filter Media | LaserSeries |
| Adjustable Water Depth |  |
|
|
|
|
|
|
| Assembled Sock/Filter Media Holder | |
|
|
|
|
|
|
| Bubble Trap | |
|
|
|
|
|
|
| Media stands in bubble trap | |
|
|
|
|
|
|
| Filter Sock Compatible | |
|
|
|
|||
|
Change socks with |
|
|
|
||||
|
Roller Mat Filter Compatible |
|
|
|||||
|
Filter Foam Primary Filtration |
|
||||||
|
Filter Foam Secondary |
|
|
|
|
|
|
|
|
ezBuild First Baffle |
|
|
|
||||
|
o-Ring Sealed Inets |
|
||||||
|
Inlet Pipe Kit |
|
||||||
|
Sock Silencers |
|
|
|||||